Before you start carving faces, it is important to draw a plan of the design on a flat wood block. To carve a face, you need a soft wood. To carve a face, you need a v-gouge carving tool. The v-gouge carving tool cuts wedges in the wood at half-way up the blank for the nose, and at three-quarters down for the mouth and chin.

How to Carve Wood Carving Faces

Apple wood

If you’ve ever carved a face with apple wood, you probably know how difficult it can be. These whimsical faces emerge from the subconscious, so they look scary, but they’re also very friendly! But how do you carve them? Here are some tips. First, you must know how to carve them well. In this article, I’ll show you how to make a perfect outline and realistic face.


The first step in making a great wood carving face is to plan your work. It can help you a lot if you can sketch out your face with a pencil before carving. Then you can paint it to create the look you want. Besides, this will protect it for years. If you’re a beginner, you can start with an old wood carving face for reference. There are hundreds of good examples online. If you don’t know where to start, just browse Pinterest or Google for examples.


Butternut wood is an ideal choice for fine whittling projects. It’s easy to work with and is less dense than basswood. The wood is also very light in color and accepts stains well. It’s also cheap when compared to other hardwoods, which makes it a great option for fine whittling crafts. Butternut wood is lightweight and cuts easily with a sharp carving tool.


If you are looking for a great wood for a face carving project, Basswood is an excellent choice. Basswood has a light grain and is relatively inexpensive. However, there are some things to remember when using this wood for carving. First, it is important to plan the project before you begin. It will be easier to work with this wood if you sketch it out first. Secondly, it should be large enough to accommodate your project.

White pine

While there are numerous varieties of Pine, white Pine is the best for wood carving. The creamy white color and dark purple knots are characteristic of Western White Pine, while all other pine varieties are less dense and therefore difficult to carve. To make carving your own wood carvings easy, you may consider soaking each piece in rubbing alcohol before beginning. The alcohol will remove surface tension and allow water to penetrate the finer grains. It is important to do this step section by section to prevent the wood from cracking.

Basswood is a good alternative to cedar

If cedar is too expensive for your budget, basswood is another good wood for carving faces. It is easy to work with and has almost no smell. This softwood is also used in kitchen utensils, musical instruments, matches, and blind slats. You can use knives, gouges, and rotary carvers to carve faces from basswood. Basswood is also a great choice for beginners because of its low odor and easy workability.

Birch wood

The faces on Baltic birch are remarkably stable and smooth. One can also use the plywood to create architectural models, carved knickknacks, and other items. This versatile wood is also available in veneered, single-piece forms. But it can be expensive, which is why the majority of woodcarvers prefer to use one-piece birch. Listed below are the most common types of plywood:

Butternut is a good alternative to apple

One of the best types of wood for carving faces is butternut. It is soft, easy to work with, and has a pinkish finish. This softwood accepts stains and finishes well, and is inexpensive compared to other hardwoods. It is also lightweight and easy to carve with a sharp carving tool. If you’re not fond of the color of apple, you might also want to consider using butternut.

Leave a Reply

Your email address will not be published.